-
kr.779.00 – kr.1,199.00Prisinterval: kr.779.00 til kr.1,199.00 inkl. moms
E3D Revo CR E3D Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series. Upgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles No extra mounts or adapters needed: Pre-drilled…
-
kr.55.00 inkl. moms
E3D Revo Fully Loaded Sock Pack 1.75mm The Revo Fully Loaded Sock Pack contains two socks for each Revo Nozzle size and an additional two for the Revo HeaterCore. Kit includes: – 2 x yellow nozzle socks – 2 x red nozzle socks – 2 x green nozzle socks – 2 x blue nozzle socks – 2 x Revo HeaterCore socks
-
kr.269.00 – kr.285.00Prisinterval: kr.269.00 til kr.285.00 inkl. moms
E3D Revo HeaterCore (Vælg volt 24V 40W/60W) The HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included). After it’s attached, just screw in a Revo Nozzle and you’re ready for simple, tool-free nozzle swaps that don’t need hot tightening. Heats up much faster than a typical heaterblock. It’s designed to be much safer, too –…
-
kr.259.00 inkl. moms
E3D Revo HeaterCore Creality 100k (Vælg volt 12V/24V) The HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included). After it’s attached, just screw in a Revo Nozzle and you’re ready for simple, tool-free nozzle swaps that don’t need hot tightening. Heats up much faster than a typical heaterblock. It’s designed to be much safer, too…
-
kr.1,799.00 inkl. moms
E3D Revo Hemera Fully Loaded Kit Ready for Revo. Change nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Revo Nozzles are a factory sealed nozzle and heatbreak in one, so they’re easy to fit and can’t leak material when in use. New hotness. A Revo HeaterCore heats up in seconds. It’s much safer too – unlike other solutions on the market, a positive temperature coefficient (PTC) means the Revo HeaterCore can not melt at extreme temperatures: power reduces as it gets…
-
kr.1,399.00 inkl. moms
E3D Revo Hemera Single Nozzle Kit Ready for Revo. Change nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Revo Nozzles are a factory sealed nozzle and heatbreak in one, so they’re easy to fit and can’t leak material when in use. New hotness. A Revo HeaterCore heats up in seconds. It’s much safer too – unlike other solutions on the market, a positive temperature coefficient (PTC) means the Revo HeaterCore can not melt at extreme temperatures: power reduces as it gets…
-
kr.1,049.00 inkl. moms
E3D Revo Hemera Upgrade Fully Loaded Kit This kit includes a Hemera heatsink with a revised design that’s compatible with a Revo HeaterCore and Revo Nozzles. – Updated Hemera heatsink adds compatibility for Revo Nozzles and Revo HeaterCore – Easy upgrade! Just swap over your old Hemera heatsink and attach the Revo HeaterCore – Comes in your choice…
-
kr.649.95 inkl. moms
E3D Revo Hemera Upgrade Single Nozzle Kit This kit includes a Hemera heatsink with a revised design that’s compatible with a Revo HeaterCore and Revo Nozzles. – Updated Hemera heatsink adds compatibility for Revo Nozzles and Revo HeaterCore – Easy upgrade! Just swap over your old Hemera heatsink and attach the Revo HeaterCore – Comes in your choice…
-
kr.1,949.00 inkl. moms
E3D Revo Hemera XS Fully Loaded Kit 24V Shorter and lighter. Revo Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its compact size also means it…
-
kr.1,199.00 inkl. moms
E3D Revo Micro Fully Loaded Kit Ready for Revo. Change nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Revo Nozzles are a factory sealed nozzle and heatbreak in one, so they’re easy to fit and can’t leak material when in use. New hotness. A Revo HeaterCore heats up in seconds. It’s much safer too – unlike…
-
kr.1,199.00 inkl. moms
E3D Revo Six Fully Loaded Kit No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle…
-
kr.850.00 inkl. moms
E3D Revo Six Single Nozzle Kit No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle…
-
kr.20.00 inkl. moms
E3D Revo Spring Triple Pack Lost the spring for your Revo HeaterCore? Don’t worry, we sell spares! – Keeps the HeaterCore into good thermal contact with a Revo Nozzle – Effective in attaching Revo HeaterCore to heatsink – Compatible with Revo Micro, Revo Six, and Revo Hemera Please note this item is not compatible with V6 ecosystem heatsinks, but it is…
-
kr.1,299.00 inkl. moms
Micro Swiss NG REVO Direct Drive Extruder til Creality CR-10 / Ender 3 Printers Micro Swiss NG™ REVO Direct Drive Extruder Micro Swiss NG REVO Extruder er resultatet af et samarbejde mellem to førende 3D-printerfirmaer – Micro Swiss og E3D. Denne højkvalitets ekstruder er designet med både pålidelighed og effektivitet for øje og kombinerer det…
-
kr.1,299.00 inkl. moms
Micro Swiss NG REVO Direct Drive Extruder til Creality Ender 5 / 5 Pro / 5 Plus Micro Swiss NG™ REVO Direct Drive Extruder Micro Swiss NG REVO Extruder er resultatet af et samarbejde mellem to førende 3D-printvirksomheder – Micro Swiss og E3D. Denne ekstruder af høj kvalitet er designet med både pålidelighed og effektivitet…
-
kr.699.00 – kr.1,149.00Prisinterval: kr.699.00 til kr.1,149.00 inkl. moms
Revo Voron E3D RAPIDCHANGE We’ve developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with our Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers. Uses Revo Nozzles – change…
