Viser 1–20 af 26 resultater
Double-sided Powder-coated PEI Satin Spring Steel Sheet The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is…
Double-sided Textured PEI Powder-coated Spring Steel Sheet Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides…
E3D Nextruder V6 Nozzle Adapter Nextruder V6 Dyse Adapter: Brug Dine V6 Dyser på Nextruder Hvis du ønsker at bruge dine eksisterende V6-dyser på din Nextruder, skal du installere dem sammen med denne dyseadapter. Denne adapter skaber den nødvendige kompatibilitet, så du kan udnytte dine foretrukne V6-dyser med din nye generation af printere. Dette produkt…
E3D Prusa V6 HotEnd MK3 Original E3D Prusa V6 Hotend Original E3D Prusa V6 Hotend Volt 24V
E3D V6 Nozzle Messing De Original E3D har bredeste udvalg, af højtydende messing dyser på markedet, konstrueret til at 3D-printe perfekt glatte lag. Tilpas din 3D-printer, til at printe fine detaljer, eller store dele med E3D’s V6-dyser. E3D V6 Nozzle, er fuldt integreret i E3D-økosystemet, af 3D-printerdele og er kompatible med V6, Lite6 og Titan…
E3D V6 Nozzle Plated Copper Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can’t handle. These nozzles are fully integrated into the E3D Ecosystem and will fit…
Hotend PTFE tube MK3S+, MMU2S This product includes: Hotend PTFE tube (1 pcs) Specifications: Length: 42.3 mm (tolerance +/- 0.2 mm) Inner diameter: 1.85 mm Outer diameter: 4 mm Compatibility: Original Prusa MK3S+ Original Prusa MK3S+ with MMU2S
MINI Textured Powder-coated Steel Sheet Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is…
Original E3D Prusa Specific Heater Cartridge 24V 40W
Original PRUSA F.I.N.D.A. sensor This product includes: FINDA sensor (1 pcs) Specifications: Body diameter: 8 mm Connector: Molex 50-57-9403 Voltage: DC 5V Cable length: 360 mm To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.
Original Prusa Filament sensor MINI This product includes: IR filament sensor 1 (pcs) IR filament sensor-Buddy board cable (1 pcs) Textile sleeve (Length: 220 mm, Width: 5 mm) (1 pcs) PTFE tube (1 pcs) MINI FSENSOR BOX (1 pcs) MINI FSENSOR COVER (1 pcs) MINI FSENSOR LEVER (1 pcs) Steel ball (1 pcs) Magnet (2 pcs) Screws: M3x12…
Original PRUSA Heatbed thermistor set Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S and MK3/S/+, MINI /+ Kompatible printermodeller: MK3/S/+, MK2, MK2S, MK2.5, MK2.5S, MINI /+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm
Original PRUSA Heatbed thermistor set Heatbed thermistor set for the Original Prusa MK4 Kompatible printermodeller: MK4 This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs)
Original PRUSA Hotend fan (MK3/S/+, MK2.5/MK2.5S ) 5V Noctua Dette produkt inkluderer: Hotend ventilator (1 stk) version A Noctua Fastgørelsesmidler
Original PRUSA Hotend Heater 40 W 120mm MK4, XL og Core One Varmelegeme 40W – 120mm: Præcis Temperaturkontrol Dette varmelegeme sikrer effektiv og præcis opvarmning i din 3D-printer. Dette produkt inkluderer: Varmelegeme 40 W – 120 mm (1 stk.) Stiftskrue M3x4 (2 stk.) Specifikationer: Spænding: 24V Effekt: 40W Længde: 120 mm Installation For at udskifte…
Original PRUSA Hotend heater cartridge E3D 24V 40W MINI /+ This product is replacement Hotend heater cartridge E3D 24V 40W. It is ONLY compatible with the MINI/+. It is NOT compatible with the MK2/S, MK2.5/S and MK3/S/+. The Molex connector is NOT included. This product includes: Hotend heater cartridge E3D 24V 40W (1 pcs) Specifications: Voltage: 24V…
Original PRUSA Hotend Thermistor NTC 100k 115mm Termistor NTC 100k – 115 mm: Præcis Temperaturmåling Dette produkt indeholder de nødvendige dele til præcis temperaturmåling i din printer. Dette produkt inkluderer: Termistor NTC 100k – 115 mm (1 stk.) Stiftskrue M3x4 (1 stk.) Installation For at udskifte delen/delene bedes du konsultere vores samlevejledninger. Sørg for at…
Original PRUSA Hotend thermistor til Prusa MINI /+ Kompatible printermodeller: MINI , MINI+ This product includes: Hotend thermistor E3D (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 840 mm To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.
Original PRUSA IR filament sensor This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3. This product includes: IR filament sensor (1 pcs) The IR filament sensor PCB color may vary (Red, Black, etc.) All properties remain the same…
Original PRUSA MK4 Heatsink Thermistor NTC 100k 90mm Termistor NTC 100k – 90 mm: Præcis Temperaturmåling Dette produkt indeholder de nødvendige komponenter til nøjagtig temperaturmåling i din printer. Dette produkt inkluderer: Termistor NTC 100k – 90 mm (1 stk.) Stiftskrue M3x4 (1 stk.) Installation For at udskifte delen(e), bedes du konsultere vores samlevejledninger. Husk at…
