Bi Metal Heat Break for E3D hotends 1.75MM
kr.149.95 inkl. momsBi Metal Heat Break for E3D hotends 1.75MM
Viser 1–20 af 22 resultater
-
-
Bimetal Heatbreak all metal til CR-6 SE / Max / CR-5 PRO
kr.99.00 inkl. momsBimetal Heatbreak all metal til CR-6 SE / Max / CR-5 PRO Bimetal Heatbreak all metal til Creality CR-6 SE / Max / CR-5 PRO hotends, nu kan du lave din standard hotend om til en all metal hotend udført i Rustfrit stål/Titanium legering med kobber
-
Bimetal Heatbreak all metal til Creality hotends
kr.99.00 inkl. momsBimetal Heatbreak all metal til Creality hotends, nu kan du lave din standard hotend om til en all metal hotend udført i Rustfrit stål/Titanium legering med kobber
-
Bimetal Heatbreak all metal til E3D blok uden gevind
kr.99.00 inkl. momsBimetal Heatbreak all metal til E3D blok uden gevind
-
Bimetal Heatbreak all metal til MK8 Creality med flere
kr.99.00 inkl. momsBimetal Heatbreak all metal til MK8 Bimetal Heatbreak all metal til Creality hotends, nu kan du lave din standard hotend om til en all metal hotend udført i Rustfrit stål/Titanium legering med kobber
-
Bimetal Heatbreak til Creality Ender 3 S1 hotends
kr.129.00 inkl. momsBimetal Heatbreak til Creality Ender 3 S1 hotends Nu kan du lave din standard hotend om til en all metal hotend udført i Rustfrit stål/Titanium legering med kobber Passer til: Ender-3 S1 / Ender-3 S1 Pro
-
E3D Groove Mount Bowden Adaptor – 1.75mm Filament (4mm OD Tubing)
kr.69.00 inkl. momsE3D Groove Mount Bowden Adaptor – 1.75mm Filament (4mm OD Tubing) This is a neat little solution for quickly and easily converting a direct extruder that would normally accept a groovemount hotend into a bowden extruder. Simply mounts in like a HotEnd, but instead accepts our PTFE tubing securely in an embedded bowden coupler. Quite…
-
E3D Hemera HeatBreak stainless steel
kr.116.00 inkl. momsE3D Hemera HeatBreak stainless steel A replacement 1.75mm stainless steel Hemera HeatBreak. Although this HeatBreak uses an M4 thread on the cold side, the hot side remains an M6 thread to maintain compatibility with the V6, Volcano and Super Volcano heater blocks. Please note: Thermal paste is not supplied with the HeatBreak. Spare sachets can…
-
E3D Prusa Specific HeatBreak (MK2, MK3) 1.75mm
kr.169.95 inkl. momsE3D Prusa Specific HeatBreak (MK2, MK3) 1.75mm The ‘Prusa specific’ HeatBreak has been specifically designed for the Prusa V6 in order to improve retraction behaviour when using the multi-material upgrade.
-
E3D V6 Stainless Steel HeatBreak
kr.105.00 inkl. momsE3D V6 Stainless Steel HeatBreak A replacement all-metal stainless steel V6 HeatBreak. These HeatBreaks are the standard for E3D HotEnds such as V6, Titan Aero and Titan Aqua. They feature a refined internal surface finish to reduce extrusion force and improved reliability with retractions. Available in both 1.75mm and 3mm variants. Please note: Thermal paste…
-
E3D V6 Titanium HeatBreak 1.75mm
kr.189.95 inkl. momsOriginal E3D V6 titanium HeatBreak Titanium V6 heatbreaks are the perfect upgrade for printing at higher temperatures, helping to maintain a sharply defined melt zone at higher temperatures. Genuine E3D heatbreaks feature a refined internal surface finish to reduce extrusion force and improve retraction reliability. Made from grade 5 titanium, these heatbreaks are exceptionally strong and…
-
Heat Break all metal 1.75MM Stainless Steel for E3D hotends
kr.49.95 inkl. momsHeat Break all metal 1.75MM Stainless Steel for E3D hotends
-
-
Hemera titanium HeatBreak E3D
kr.210.00 inkl. momsHemera titanium HeatBreak Hemera Titanium HeatBreak are the perfect upgrade for printing at higher temperatures, helping to maintain a sharply defined melt zone at higher temperatures. Genuine E3D HeatBreaks feature a refined internal surface finish to reduce extrusion force and improve retraction reliability. Made from grade 5 titanium, these HeatBreaks are exceptionally strong and have…
-
Kølepasta / Thermal Compound Paste 1g
kr.10.00 inkl. momsKølepasta / termisk pasta / Thermal Grease Sikre god fordeling af varmen når man samler hotend.
-
Kølepasta / Thermal Grease sprøjte 3g
kr.28.00 inkl. momsKølepasta / termisk pasta / Thermal Grease 3g Sikre god fordeling af varmen når man samler hotend.
-
Micro Swiss All Metal MK8 Thermal Tube
kr.99.00 inkl. momsMicro Swiss All Metal MK8 Thermal Tube This is a performance MK8 All Metal Thermal Tube Upgrade. It is made from stainless steel and plated with TwinClad XT coating. TwinClad XT is a very low friction Electroless Nickel composite coating, often used in injection molding because of it release properties. This high lubricity plating will prevent clogging…
-
Micro Swiss heat break for E3D V6 1.75mm
kr.135.00 inkl. momsMicro Swiss heat break for E3D This heat break is a direct replacement for use in E3D v6 1.75mm hot ends. This tube made from stainless steel and plated with TwinClad XT coating. TwinClad XT is a very low friction Electroless Nickel composite coating, often used in injection molding because of it release properties. This high…
-
Micro Swiss MK10 All Metal Hotend Kit
kr.249.95 inkl. momsMicro Swiss MK10 All Metal Hotend Kit This is an all metal hotend upgrade kit for MK 10 style extruders. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because…
-
Original E3D V6 HeatSink with Coupling
kr.165.00 inkl. momsOriginal E3D V6 HeatSink with Coupling A replacement HeatSink for 1.75mm V6 HotEnds. Please note – this product fits both Bowden and Direct Drive HotEnds and includes an embedded coupling.