Azurefilm ASA Filament Silver 1,75 mm 1kg
- Materiale: ASA
- Vægt: 1 kg (netto vægt)
- Diameter: 1.75 mm (± 0.02 mm tolerance)
- Rundheds tolerance: ± 0.02 mm
- Spole diameter: 210 mm
- Spole brede: 62 mm
- RAL: 9007
Azurefilm ASA Filament White Printing Recommendations:
Nozzle temperature: 240–260°C
Heated bed: Recommended 100–120°C + Enclosure
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.
Access to all technical data sheets can be found here.
ASA filament net weight of 1 kg (2.2 lbs), in the welding positions on the outer diameter 210 mm on the reel, with an inside opening of 60 mm diameter and a width of 62 mm. The filament is vacuum sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the ASA filament is 1.75 mm and it is manufactured in 3‑ different shades.
ASA filament is made for open 3D Printers that can not print with ABS Filament. ASA Filament is stiffer, stronger, flexible and UV resistant. It is mainly designed for professional use. Most often it is used for the production of prototypes, which must withstand higher temperatures. Finished products that are made of ASA filament are very durable and impact resistant. For good results, you must print at a temperature of 240–260°C. Filament AzureFilm ASA is perfectly printed on Creality, Geetech, Prusa and similar printers. For printing with an ASA filament, we recommend that the printer are closed and the table should be heated to 100–120°C. Please note that the range in the printing temperature may slightly differ depending on the use of other printers.