Viser 21–40 af 75 resultater
-
kr.1,049.00 inkl. moms
E3D Revo Hemera Upgrade Fully Loaded Kit This kit includes a Hemera heatsink with a revised design that’s compatible with a Revo HeaterCore and Revo Nozzles. – Updated Hemera heatsink adds compatibility for Revo Nozzles and Revo HeaterCore – Easy upgrade! Just swap over your old Hemera heatsink and attach the Revo HeaterCore – Comes in your choice…
-
kr.649.95 inkl. moms
E3D Revo Hemera Upgrade Single Nozzle Kit This kit includes a Hemera heatsink with a revised design that’s compatible with a Revo HeaterCore and Revo Nozzles. – Updated Hemera heatsink adds compatibility for Revo Nozzles and Revo HeaterCore – Easy upgrade! Just swap over your old Hemera heatsink and attach the Revo HeaterCore – Comes in your choice…
-
kr.1,949.00 inkl. moms
E3D Revo Hemera XS Fully Loaded Kit 24V Shorter and lighter. Revo Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its compact size also means it…
-
kr.1,199.00 inkl. moms
E3D Revo Micro Fully Loaded Kit Ready for Revo. Change nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Revo Nozzles are a factory sealed nozzle and heatbreak in one, so they’re easy to fit and can’t leak material when in use. New hotness. A Revo HeaterCore heats up in seconds. It’s much safer too – unlike…
-
kr.1,199.00 inkl. moms
E3D Revo Six Fully Loaded Kit No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle…
-
kr.850.00 inkl. moms
E3D Revo Six Single Nozzle Kit No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle…
-
kr.20.00 inkl. moms
E3D Revo Spring Triple Pack Lost the spring for your Revo HeaterCore? Don’t worry, we sell spares! – Keeps the HeaterCore into good thermal contact with a Revo Nozzle – Effective in attaching Revo HeaterCore to heatsink – Compatible with Revo Micro, Revo Six, and Revo Hemera Please note this item is not compatible with V6 ecosystem heatsinks, but it is…
-
kr.449.00 inkl. moms
E3D Titan Extruder Performance By using a 3:1 gearing ratio, precision milled hobbs, and an adjustable idler lever, Titan is a powerful extruder whilst also being lightweight and compact. Power The 3:1 gear ratio means you’re able to use lighter motors as you’ll need less torque for the same filament pushing force – so direct…
-
kr.499.00 inkl. moms
E3D V6 All-Metal HotEnd til bowden tube 12v Description kit High-temperature performance The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional…
-
kr.499.00 inkl. moms
E3D V6 All-Metal HotEnd til bowden tube 24V kit High-temperature performance The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics)….
-
kr.499.00 inkl. moms
E3D V6 All-Metal HotEnd til direct drive 12v Description kit High-temperature performance The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional…
-
kr.499.00 inkl. moms
E3D V6 All-Metal HotEnd til direct drive 24V Description kit High-temperature performance The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional…
-
kr.299.95 inkl. moms
E3D V6 Nozzle Fun Pack V6 Nozzles: V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. Brass Brass nozzles, featuring E3D’s signature internal geometry, have optimal…
-
Tilbud!
kr.299.95 Den oprindelige pris var: kr.299.95.kr.100.00Den aktuelle pris er: kr.100.00. inkl. moms
E3D V6 Nozzle Fun Pack 2.85mm V6 Nozzles: 2.85/3mm V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. Brass Brass nozzles, featuring E3D’s signature internal geometry,…
-
kr.187.00 inkl. moms
E3D V6 Nozzle Hardened Steel Hardened abrasion-resistant nozzles developed to last a lifetime. 3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like woodfill all take their toll on a standard nozzle, where hardened steel will last and last. These nozzles are fully integrated into the E3D Ecosystem and will…
-
kr.65.00 – kr.125.00Prisinterval: kr.65.00 til kr.125.00 inkl. moms
E3D V6 Nozzle Messing De Original E3D har bredeste udvalg, af højtydende messing dyser på markedet, konstrueret til at 3D-printe perfekt glatte lag. Tilpas din 3D-printer, til at printe fine detaljer, eller store dele med E3D’s V6-dyser. E3D V6 Nozzle, er fuldt integreret i E3D-økosystemet, af 3D-printerdele og er kompatible med V6, Lite6 og Titan…
-
kr.110.00 inkl. moms
E3D V6 Nozzle Plated Copper Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can’t handle. These nozzles are fully integrated into the E3D Ecosystem and will fit…
-
kr.549.95 inkl. moms
E3D V6 Nozzle Pro Pack V6 Nozzles: V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. Brass Brass nozzles, featuring E3D’s signature internal geometry, have optimal…
-
kr.160.00 inkl. moms
E3D V6 Nozzle Stainless Steel Stainless Steel Stainless steel nozzles are suitable for food-grade printing, or applications where the lead content of the brass nozzles is unsuitable. Rated to a maximum temperature of 500°C.
-
kr.193.75 inkl. moms
E3D V6 Plated Copper HeaterBlock A plated copper V6 heater block allows you to reach temperatures exceeding 320°C (providing you use a PT100, PT1000 or thermocouple) unlocking the possibilities of printing high-temperature filaments such as Ultem and PEEK. Supplied with an M3 grub screw to secure a cartridge-style thermistor, PT100 or thermocouple, and an M3…
