Beskrivelse

Spectrum Filaments PLA PRO POLAR WHITE

Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing.

PLA Pro combines two desired features: ease of printing as with normal PLA material while maintaining properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% higher impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring when printing with ABS.

PLA Pro material is also characterized by an increased flow index.

Spectrum Filaments PLA PRO POLAR WHITE advantages:

a good alternative to styrene-based materials
printing possible without hot pad
easy separation of the object from the table
high strenghtness comparable to ABS
no shrinkage after cooling
not flammable
ideal side surface of printouts

Post annealing

Filament Spectrum PLA Pro can be treated at high temperature using a heating chamber. After the crystallization of the printout, the model is characterized by increased thermal resistance and almost twice higher resistance than ABS.

The general guideline concerning crystallization process can be found at the top of the page before the product description.

Farve: POLAR WHITE
RAL: 9003
Diameter: 1,75 mm
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 185-230 ° C
Opvarmet emneplade: 0-45 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

Nøglefunktioner:

godt alternativ til styrenbaserede materialer
øget termisk modstand (op til 85°C) – efterudglødet ( når det er printet)
ekstrem høj slagfasthed sammenlignet med klassiske materialer baseret på PLA
slagfasthed næsten 50 % højere end klassisk ABS-materiale
høj holdbarhed sammenlignelig med ABS-udskrifter
højere proceskapacitet på grund af muligheden for at øge udskrivningshastigheden (som følge af forbedret flydeevne)
bedre vedhæftning mellem lagene, hvilket giver glattere sideoverflader
nem adskillelse af objektet fra bed

Applications: