Spectrum Filaments PLA PRO DARK GREY – 1kg 1.75mm

kr.190.00 inkl. moms

Kun 4 tilbage på lager

Varenummer (SKU): 5903175658340 Kategori:

Beskrivelse

Spectrum Filaments PLA PRO DARK GREY

Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing.

PLA Pro combines two desired features: ease of printing as with normal PLA material while maintaining properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% higher impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring when printing with ABS.

PLA Pro material is also characterized by an increased flow index.

Spectrum Filaments PLA PRO DARK GREY advantages:

  • a good alternative to styrene-based materials
  • printing possible without hot pad
  • easy separation of the object from the table
  • high strenghtness comparable to ABS
  • no shrinkage after cooling
  • not flammable
  • ideal side surface of printouts

Post annealing

Filament Spectrum PLA Pro can be treated at high temperature using a heating chamber. After the crystallization of the printout, the model is characterized by increased thermal resistance and almost twice higher resistance than ABS.

The general guideline concerning crystallization process can be found at the top of the page before the product description.

Farve: DARK GREY
RAL: 7011
Diameter: 1,75 mm
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 185-230 ° C
Opvarmet emneplade: 0-45 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

zzzplapro

Nøglefunktioner:

  • godt alternativ til styrenbaserede materialer
  • øget termisk modstand (op til 85°C) – efterudglødet ( når det er printet)
  • ekstrem høj slagfasthed sammenlignet med klassiske materialer baseret på PLA
  • slagfasthed næsten 50 % højere end klassisk ABS-materiale
  • høj holdbarhed sammenlignelig med ABS-udskrifter
  • højere proceskapacitet på grund af muligheden for at øge udskrivningshastigheden (som følge af forbedret flydeevne)
  • bedre vedhæftning mellem lagene, hvilket giver glattere sideoverflader
  • nem adskillelse af objektet fra bed

Applications:

  • funktionel prototyping
  • værktøj
  • koncept og demo prototyping af designede færdige og halvfabrikata
  • industrielt design
  • dele, der kræver høj slagstyrke

 

Yderligere information

Vægt 1.5 kg