Beskrivelse
Bambu Lab Hotend Stainless Steel Nozzle A1 Series
Quick Swap Nozzle Design
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend.
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
Bambu Lab Hotend Stainless Steel Nozzle A1 Series Filament Compatibility
| Material | 0.2 mm Nozzle | 0.4 mm Nozzle | 0.6 mm Nozzle | 0.8 mm Nozzle | Hardened Steel Required? |
| General PLA | YES | YES | YES | YES | Optional |
| Wood/Rock/Metal-filled PLA | *NO | YES | YES | YES | Optional |
| PETG | YES | YES | YES | YES | Optional |
| PVA | YES | YES | YES | YES | Optional |
| ABS | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| PC | YES | YES | YES | YES | Optional |
| PA | *NO | YES | YES | YES | Optional |
| TPU | *NO | YES | YES | YES | Optional |
| PLA-CF | *NO | *Highly Recommended |
YES | YES | *Required |
| PETG-CF | *NO | *Highly Recommended |
YES | YES | *Required |
| PAHT-CF | *NO | YES | *Highly Recommended |
YES | *Required |
| PET-CF | *NO | YES | *Highly Recommended |
YES | *Required |
Installation
Learn more about replacing the Hotend with Nozzle on Bambu Lab Wiki.
In the Box
1. Hotend with 0.4 mm Nozzle * 1
Compatibility
A1 Series
