E3D Revo Six Single Nozzle Kit

No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print. 

Ready for Revo. Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today. 

Enhanced performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium HeaterBlock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway. 

A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.

Compatible with:

Prusa i3 MK2/ MK3 variants (make sure you select the correct voltage for your setup)

Nextruder V6 Dyse Adapter: Brug Dine V6 Dyser på Nextruder

Hvis du ønsker at bruge dine eksisterende V6-dyser på din Nextruder, skal du installere dem sammen med denne dyseadapter. Denne adapter skaber den nødvendige kompatibilitet, så du kan udnytte dine foretrukne V6-dyser med din nye generation af printere.

Dette produkt inkluderer:

• Nextruder V6 Dyse Adapter (1 stk.)

Bemærk: V6 dyse er ikke inkluderet.

Installation

For at installere Nextruder V6 Dyse Adapteren, bedes du konsultere vores samlevejledninger.

Passer til

• MK4
• XL
• MK3.9
• MK4S
• MK3.9S
• CORE One

Prusa Nextruder Dyse: Helt igennem metal for forbedret pålidelighed

Til vores nye generation af printere bruger vi specielle dyser med en filamentføring helt i metal. Det betyder, at hele vejen filamentet bevæger sig gennem Nextruder er uden PTFE-rør. Dette forbedrer printerens overordnede pålidelighed og gør dyseskrift langt hurtigere.

Har du dine foretrukne V6-kompatible dyser? Ingen bekymringer – vi tilbyder en simpel Nextruder-til-V6-adapter, så du stadig kan bruge dem.

Installation

For at installere din Nextruder Prusa Dyse, bedes du konsultere vores samlevejledninger.

Passer til

• MK4
• XL
• MK3.9
• MK4S
• MK3.9S
• CORE One

E3D Lite 6 HotEnd til direct drive 24V

Original E3D Lite 6 HotEnd til direct drive 24V

Easy to use

Think of Lite6 as V6’s little brother: it’s a lower-cost HotEnd with a more modest specification, but still a great option for beginners and those on a budget. Despite being an entry-level HotEnd, it maintains the great extrusion control that you would expect from an E3D product.

Great for Everyday Materials

The use of a PTFE liner creates a temperature limit of 240°C, so it’s not the HotEnd of choice for printing higher-performance engineering plastics like Nylon, Polycarbonate or Ultem (for those, go for the V6, Hemera or any of our all-metal Hot-Ends.. Lite6 has a slightly shorter effective melt-zone than V6, which does mean that print speeds are more modest, but still completely appropriate for all but the very fastest 3D printers on the market. If you do need to get more speed from your machine then you can, of course, upgrade to either Volcano or full V6 with ease.

Reliable

The stainless steel body of Lite6 makes it incredibly robust and tolerant of accidents that new users inevitably encounter. If you accidentally crash your Lite6 into a print there is effectively zero chance of it breaking.

The stainless steel parts are incredibly thermally sound and essentially impossible to damage with the supplied heater. This means that in the event of cooking your PTFE liner you can quickly and easily swap it out for a new one and return your Lite6 to full functionality.

Compatible

We’ve re-used as many parts from V6 and the rest of the E3D ecosystem as possible. The beautiful polycarbonate fan duct, the proven 30mm ball-bearing cooling fan. Most importantly we’re using the same highly optimized nozzles and heater blocks to deliver great performance in the most important areas of Lite6.

Purpose made 30W and 40W heater cartridges for E3D HotEnds.

These aren’t the same as the low-quality parts often seen in clones and have a considerably higher internal build quality.

Please ensure you double-check the power supply before choosing either 12V or 24V.

E3D V6 All-Metal HotEnd til direct drive 12v

Description

kit