Bambu Lab – Techbitshop https://techbitshop.dk 3D printere, filament, tilbehør og elektronik Fri, 24 Jul 2026 19:24:20 +0000 da-DK hourly 1 https://techbitshop.dk/wp-content/uploads/2018/08/cropped-icon_techbitshop_clean-32x32.png Bambu Lab – Techbitshop https://techbitshop.dk 32 32 PTFE Tube Connector A1 https://techbitshop.dk/vare/ptfe-tube-connector-a1/ Fri, 24 Jul 2026 19:17:17 +0000 https://techbitshop.dk/?post_type=product&p=72658

PTFE Tube Connector A1

The A1 PTFE Tube Connector used in A1 is attached to the X-axis motor housing and can be removed together with the pneumatic connector.

Compatibility

A1 Exclusive

In the Box

PTFE Tube Connector *1

Installation

Learn more about replacing the PTFE Tube Connector – A1 on Bambu Lab Wiki.

]]> Flow Blocker H2D and H2C https://techbitshop.dk/vare/flow-blocker-h2d-and-h2c/ Fri, 24 Jul 2026 19:12:11 +0000 https://techbitshop.dk/?post_type=product&p=72655

Flow Blocker H2D and H2C

The Flow Blocker is located beneath the nozzle and is used to block the nozzle in a non-operating state to prevent filament leakage.

Installation

Learn more about the Flow Blocker on Bambu Lab Wiki.

In the Box

– Flow Blocker*3

– MG2.5-8 Screw*3

Compatibility

H2D/H2C

]]> Hall Effect Sensor H2 series https://techbitshop.dk/vare/hall-effect-sensor-h2-series/ Fri, 24 Jul 2026 19:05:45 +0000 https://techbitshop.dk/?post_type=product&p=72651

Hall Effect Sensor H2 series

There are two types of Hall Effect Sensor: Digital Hall Effect Sensor and Analog Hall Effect Sensor.

The Digital Hall Effect Sensor is primarily used to detect the position changes of various internal components of the printer, ensuring the printer operates normally and assisting in controlling the motion system.

The Analog Hall Effect Sensor is mainly used to monitor the speed and rotation direction of the printer’s rotating parts, helping to adjust the printer’s speed and precision, ensuring print quality.

Installation

Learn more about Hall Effect Sensor on Bambu Lab Wiki.

In the Box

– Digital Hall Effect Sensor*1

– Analog Hall Effect Sensor*1

– BT2-5 Screw*1

– M2-2.5 Screw*1

Compatibility

H2 Series

]]> Dual Extruder Gears H2D and H2C https://techbitshop.dk/vare/dual-extruder-gears-h2d-and-h2c/ Fri, 24 Jul 2026 19:00:06 +0000 https://techbitshop.dk/?post_type=product&p=72648

Dual Extruder Gears H2D and H2C

The Dual Extruder Gears are responsible for precisely advancing and controlling the movement of the filament, ensuring a smooth printing process, and switching to different filaments when needed.

Installation

Learn more about the Dual Extruder Gears on Bambu Lab Wiki.

In the Box

– Dual Extruder Gears*1

Compatibility

H2D/H2C

]]> Dual Extruder Filament Guide H2D https://techbitshop.dk/vare/dual-extruder-filament-guide-h2d/ Fri, 24 Jul 2026 18:53:37 +0000 https://techbitshop.dk/?post_type=product&p=72644

Dual Extruder Filament Guide H2D

The Dual Extruder Filament Guide primarily serves to direct the filament from the extruder gears to the nozzle.

Installation

Learn more about the H2D Dual Extruder Filament Guide on Bambu Lab Wiki.

In the Box

For H2D

– Dual Extruder Filament Guide*1

– BT2-6 Screw*1

– M2.5-7 Screw*3

– M2.5-5 Screw*2

Compatibility

H2D and H2D Laser

]]> AMS 2 Pro PTFE Tubes 185mm*2 + 225mm*2 (AMS 2 Pro Internal) https://techbitshop.dk/vare/ams-2-pro-ptfe-tubes/ Fri, 24 Jul 2026 18:01:41 +0000 https://techbitshop.dk/?post_type=product&p=72641

AMS 2 Pro PTFE Tubes 185mm*2 + 225mm*2 (AMS 2 Pro Internal)

The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its outer diameter is 4mm.

Please note that the PTFE tubes are consumables and are at risk of wear, as they may rub against the filament over time. We recommend that you check the PTFE tubes for wear during your maintenance of the machine.

If the tubes are worn and not replaced in time, this may lead to feeding failures, filament accumulation inside the AMS, etc.  

Installation

Replacement guide of the PTFE Tube for different devices: Bambu Lab Wiki

]]> Bambu Bus Cable – 6pin for AMS 2 Pro and AMS HT https://techbitshop.dk/vare/bambu-bus-cable-6pin-for-ams-2-pro-and-ams-ht/ Fri, 24 Jul 2026 15:11:10 +0000 https://techbitshop.dk/?post_type=product&p=72636

Bambu Bus Cable – 6pin for AMS 2 Pro and AMS HT

The printer can be directly connected to the AMS 2 Pro or AMS HT using Bambu Bus Cable – 6pin.

In the Box

– Bambu Bus Cable – 6pin 1100mm *1

Compatibility

AMS 2 Pro, AMS HT

]]> Dual Extruder Idlers and Filament Sensor https://techbitshop.dk/vare/dual-extruder-idlers-and-filament-sensor/ Fri, 24 Jul 2026 14:50:34 +0000 https://techbitshop.dk/?post_type=product&p=72633

Dual Extruder Idlers and Filament Sensor

The Dual Extruder Idlers and Filament Sensor works together with the drive gear to grip and feed the filament, ensuring stable extrusion. In a dual extrusion system, it switches between different filament paths to support multi-color or multi-material printing.

Installation

Learn more about Dual Extruder Idlers and Filament Sensor on Bambu Lab Wiki.

In the Box

– Dual Extruder Idlers and Filament Sensor*1

– BT2-5 Screw*2

– MG2.5-19.5 Screw*2

Compatibility

H2D/H2C

]]> AMS 2 Pro Active Support Shaft Assembly https://techbitshop.dk/vare/ams-2-pro-active-support-shaft-assembly/ Fri, 24 Jul 2026 14:41:56 +0000 https://techbitshop.dk/?post_type=product&p=72631

AMS 2 Pro Active Support Shaft Assembly

The AMS 2 Pro Active Support Shaft Assembly is a roller for supporting the filament spool and also for actively driving the spool to roll.

Installation

Learn more about the AMS 2 Pro Active Support Shaft Assembly on Bambu Lab Wiki.

In the Box

– AMS 2 Pro Active Support Shaft Assembly *1

– 693ZZ Bearing *2

Compatibility

AMS 2 Pro

]]> AMS 2 Pro Driven Support Shaft Assembly https://techbitshop.dk/vare/ams-2-pro-driven-support-shaft-assembly/ Fri, 24 Jul 2026 14:30:39 +0000 https://techbitshop.dk/?post_type=product&p=72629

AMS 2 Pro Driven Support Shaft Assembly

The  Shaft Assembly is a roller for supporting the filament spool.

Installation

Learn more about the  Assembly on Bambu Lab Wiki.

In the Box

– AMS 2 Pro Driven Shaft Assembly *1

– 693ZZ Bearing *2

Compatibility

AMS 2 Pro

]]>