Beskrivelse
Filament PM PLA GlowJet Glow in the dark
Filament PM 1,75 GlowJet – Glow in the dark 0,5 kg
PLA – so-called starting material for 3D printing
PLA (polylactic acid)
– easy to print material
– is suitable for printing large objects
– is made from corn starch and biodegradable
– is suitable for beginners, as printing from it is trouble-free
– PLA prints are not ideal for outdoor use (low-temperature resistance, low UV resistance)
PRINTING SETUP
Nozzle: 200 – 220°C
Heatbed: 60 °C
For colors with glitters, we recommend a nozzle of 0.5 mm and larger.
ADVANTAGES:
easy to print
can print tiny parts
can print huge objects
hard and tough
no warping
DISADVANTAGES:
brittle
low-temperature resistance
difficult post-processing
COMPARISON OF ABS AND PLA
PLA is easier and faster to process under the same initial conditions, but its products are significantly less resistant to higher temperatures (it starts to soften around 60 ºC, while ABS up to 90 ºC). So if you expect higher temperatures for the final product, then ABS is a better choice. ABS prints are mostly matte, PLA prints are rather glossy. PLA material is biodegradable, while ABS material is not, but can be recycled. PLA is more suitable for use in the food industry (*without certification, as the certification, would lose its validity the moment the filament passes through the nozzle).
Diameter: 1.75 mm
Tolerance: 0,05 mm
Empty spool weight: 0.216 kg
Packaging weight: 0.84 kg
Spool dimensions: diameter: 200 mm, height: 55 mm
Packaging dimensions: width: 225 mm, height: 65 mm, depth: 210 mm
Nozzle: 200 – 220 °C
Heatbed: 60 °C
RAL:
Pantone:
