Tilbud

Azurefilm PLA Strongman Blue 1,75 mm 1kg

DKK124.00 inkl. moms

På lager

Beskrivelse

Filament PLA Strongman Blue, is as solid as the ABS filament and still has the functionality of ordinary PLA material.
Filament Strongman was developed out of users need of having simple to print material just like PLA, with much more improved
formula for toughness and resistance. We joined forces with one of the best universities for polymer characterization and created
material that is one of a kind on the market. Many of our customers do not like the ABS filament since it creates difficulties during
the printing process. Compared to conventional PLA filament, the PLA Strongman is much tougher and impact-resistant. It is
used for printing drones, bearings and all kind of products that require greater strength. In the video below, you can see how we
dropped heavy weighted object on plain PLA filament and PLA Strongman filament. Result? PLA Strongman remained unchanged,
while plain PLA filament broke.

Regarding the temperature resistance, this filament is equal to the ordinary PLA filament. For good results, you must print at a
temperature of 190-210 ° C and the printing table should be heated to 50-60 ° C. Please note that the range in the print temperature
may slightly differ depending on the use of other printers.

Strongman filament has a net weight of 1 kg , in the welding position on the reel of 210 mm in diameter, with an inside opening
of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to
remain fresh.

  • Materiale: PLA Strongman PLA + / PLA Pro
  • Vægt: 1 kg (netto vægt)
  • Diameter: 1.75 mm (± 0.02 mm tolerance)
  • Rundheds tolerance: ± 0.02 mm
  • Spole diameter: 210 mm
  • Spole brede: 62 mm

Anbefalede temperaturer:

  • Hot end: 190-210 °C
  • Heated bed: 50-60 °C

Yderligere information

Vægt 1.4 kg