Bondtech CHT BiMetal RepRap M6 Coated Nozzle Funktioner

• Kobber krop;
• Indlæg af hærdet vanadiumstål;
• Nikkel belægning;
• Tilgængelige størrelser : 0.40, 0.60, 0.80, 1.0mm;
• Optimeret til 1.75mm filament;
• Kompatibel med 2.85mm filament.
• Kræver 6 mm skruenøgle

Bondtech CHT BiMetal RepRap Coated dyse fordele

• Slibesikker til at arbejde med kul- og glasfiberkompositmaterialer;
• Højere smeltekapacitet ved at øge overfladearealet af varmevæggene
• Flowhastighedsstigninger mellem 25 og 65 %
• Konkurrencedygtig pris/ydelsespris
• Bearbejdet med ultra-præcision
• Kobberhus og hærdet vanadiumstål indsatsdyse med nikkelbelagt overflade
• Følger dysestandarder:
  • RepRap (M6×1×7.5×12.5)
• May be used with 1.75 or 2.85mm hotends.

Flowrategevinster kan variere. Resultaterne afhænger af den anvendte hardware, materialer og printindstillinger.

ADVARSEL: Undgå kold udskiftning af Bondtech CHT-dyser

Varm varmeblokken op til 280C, eller mindst over 250C, før du fjerner eller spænder en Bondtech CHT-dyse. Brug højst 1,0 Nm moment. Anbefalet 0,5 Nm

ADVARSEL: Størrelsesbegrænsning for fiberfyldte filamenter

Til kul- eller glasfiberfyldte slibende filamenter, brug kun 0,6, 0,8 og 1,0 mm dysestørrelser.

ADVARSEL: Til partikelfyldte filamenter

Til metal, træ, glitter eller andre partikelfyldte slibende filamenter kan du bruge 0,4 mm dysestørrelsen.

Datablad Bondtech_600-A-CHT-MOS-175-XX

 

Funktioner

• Tilgængelige størrelser : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm;
• Optimeret til 1.75mm filament;
• Kompatibel med 2.85mm filament.
• Kræver 6 mm skruenøgle

Hoved Bondtech CHT Coated Brass Nozzle V6 / Reprap Fordele

• Højere smeltekapacitet ved at øge overfladearealet af varmevæggene
• Overkommelig pris
• Bearbejdet med ultra-præcision
• Messing nozzle med nikkelbelagt overflade
• Følger dysestandarder:
  • RepRap (M6×1×7.5×12.5)
• May be used with 1.75 or 2.85mm hotends.

Fordele ved Bondtech CHT® teknologi:

Bondtech CHT® nozzles del filamentet i 3 tyndere tråde, så materialet kan smelte indefra. Derved smelter materialet hurtigere, og der kan anvendes højere strømningshastigheder.

Anbefalede materialer

Brug denne dyse med følgende materialer:

• PLA
• ABS
• HIPS
• PC
• TPU
• TPE
• Nylon
• PETG
• ASA
• PP
• PVA

Til tekniske og slibende materialer anbefaler vi at bruge andre dyser i vores sortiment.

The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.

Bondtech Mini Geared Designed for Mosquito

This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integrated torque lock system to make the interface very strong and makes nozzle changes a breeze.

Made with PA12 by SLS

The housing parts are professionally SLS printed in nylon for maximum strength and precision.

This extruder only supports 1.75 mm size filament.

Bondtech Mini Geared What’s in the box

The following elements are supplied with the BMG-M:

• BMG-M Assembly with Drive Gears and Push-fit;
• Thumbscrew Assembly;
• Brass Motor Gear with Set Screw

---

Nickel Coated Hardened Steel Drive Gears

The Bondtech BMG-M utilizes an internal gearing ratio of 3:1 together with precision cnc-machined NIckel Coated Hardened Steel drive gears to give you a compact powerhouse for all your applications. Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions in a lightweight and compact package.

Bondtech Mini Geared Bondtech Dual-Drive

Our unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions. Bondtech users the world over will attest that even in prints with thousands of retracts our extruders perform flawless, with unmatched precision, and zero damage or degradation to the filament.

Multi-material capability

Our BMG extruder feeds all material with high reliability, from slippery nylons and soft TPU/TPE filaments to highly rigid and sometimes brittle carbon-filled high-strength materials. The extruder is designed for 1.75 mm filaments, but has been tested to ensure performance of filament from 1.5mm up to 2.0mm allowing for high reliability regardless of the tolerance of the filament used. The filament path is fully guided throughout the extruder body and the housing maintains tight tolerances to the drive gears mitigating the chances of Filament Misfeed when the hotend experiences increased back pressure or highly flexible filaments are used.

Adjustable tension

The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament. This gives you the power to adjust according to your preferences and to optimize for the type of material you are using.

Quick-Release

To be able to do material changes in a snap, simply activate the Quick-Release lever to release the tension and pull the material to be changed out of the extruder, keep it activated and insert the new material.

Optimized design

This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integrated torque lock system to make the interface very strong and makes nozzle changes a breeze. Mounting your hotend is simple, secure, and wobble free by means of just two bolts.

NOTICE

---

The following parts are NOT included in this product: mounting bracket; stepper motor; Hotends; Heaters, Thermistors, and their Cables.

To use this Bondtech Extruder, you will also need to buy the following:

• a Mosquito Hotend or a Mosquito Magnum Hotend for higher material flow;
• the Boron Nitride Paste;
• the Mosquito Thermistor;
• the Mosquito 12v 50w Heater Cartridge or the Mosquito 24v 50w Heater Cartridge;

Optional items

• one or more Vanadium Nozzles;
• a Mosquito 12v fan or a Mosquito 24v fan to cool down the hotend;
• a 1.5Nm Torque Wrench to properly tighten the nozzle(s).

 

---

Flexible mounting options

We have designed a standard mounting bracket CNC-machined in 3 mm aluminum for maximum stability. Please see below for available mounts.

The extruder fits any Nema17 stepper motor with a standard 5 mm shaft. For suitable stepper motors, please select one from our webshop or use your own motor.

Weight without motor: 75g
E-step value: 415

This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

Advantages

• Affordable price
• Machined with ultra-precision

Bondtech Brass Nozzle V6, Mosquito & E3D hotends Recommended Materials

Use this nozzle with the following materials:

• PLA
• ABS
• HIPS
• PC
• TPU
• TPE
• Nylon
• PETG
• ASA
• PP
• PVA

For technical and abrasive materials we recommend to use other nozzles in our range.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Explaining the Bondtech Nozzles reference standard : MA¹×A²×B×C D E

 

MA¹xA² refers to the nozzle threading :
MA¹ thread with A² mm pitch.

B >> refers to the nozzle neck length :
B mm long.

C refers to the nozzle overall length :
C mm long.

D refers to the filament diameter:
1.75 or 2.85 mm

E refers to the nozzle diameter:
15,25, 40, 60, 80 … mm/100

This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

Main Advantages

• Affordable price
• Machined with ultra-precision
• Brass nozzle with Nickel coated surface

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.

Bondtech Coated Nozzle V6, Mosquito & E3D hotends Recommended Materials

Use this nozzle with the following materials:

• PLA
• ABS
• HIPS
• PC
• TPU
• TPE
• Nylon
• PETG
• ASA
• PP
• PVA

For technical and abrasive materials we recommend to use other nozzles in our range.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Explaining the Bondtech Nozzles reference standard : MA¹×A²×B×C D E

 

MA¹xA² refers to the nozzle threading :
MA¹ thread with A² mm pitch.

B >> refers to the nozzle neck length :
B mm long.

C refers to the nozzle overall length :
C mm long.

D refers to the filament diameter:
1.75 or 2.85 mm

E refers to the nozzle diameter:
15,25, 40, 60, 80 … mm/100