This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

Advantages

• Affordable price
• Machined with ultra-precision

Bondtech Brass Nozzle V6, Mosquito & E3D hotends Recommended Materials

Use this nozzle with the following materials:

• PLA
• ABS
• HIPS
• PC
• TPU
• TPE
• Nylon
• PETG
• ASA
• PP
• PVA

For technical and abrasive materials we recommend to use other nozzles in our range.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Explaining the Bondtech Nozzles reference standard : MA¹×A²×B×C D E

 

MA¹xA² refers to the nozzle threading :
MA¹ thread with A² mm pitch.

B >> refers to the nozzle neck length :
B mm long.

C refers to the nozzle overall length :
C mm long.

D refers to the filament diameter:
1.75 or 2.85 mm

E refers to the nozzle diameter:
15,25, 40, 60, 80 … mm/100

This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

Main Advantages

• Affordable price
• Machined with ultra-precision
• Brass nozzle with Nickel coated surface

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.

Bondtech Coated Nozzle V6, Mosquito & E3D hotends Recommended Materials

Use this nozzle with the following materials:

• PLA
• ABS
• HIPS
• PC
• TPU
• TPE
• Nylon
• PETG
• ASA
• PP
• PVA

For technical and abrasive materials we recommend to use other nozzles in our range.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Explaining the Bondtech Nozzles reference standard : MA¹×A²×B×C D E

 

MA¹xA² refers to the nozzle threading :
MA¹ thread with A² mm pitch.

B >> refers to the nozzle neck length :
B mm long.

C refers to the nozzle overall length :
C mm long.

D refers to the filament diameter:
1.75 or 2.85 mm

E refers to the nozzle diameter:
15,25, 40, 60, 80 … mm/100