Shorter and lighter. Revo Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its compact size also means it occupies less space inside your 3D printer’s build volume – useful for smaller 3D printers.

Capable with wide range of 3D printing filaments. Enjoy excellent performance with all 3D printing materials, particularly challenging materials like flexibles and abrasives. Enhanced extrusion and retraction control means you can 3D print soft flexibles with a shore hardness as low as 75A!

Backwards compatible. The heatsink geometry for Revo Hemera XS accepts Revo Nozzles as well as V6 nozzles with a Hemera HeatBreak (sold separately).

All the force you need. Revo Hemera XS has all the extrusion force you need to drive the entire E3D ecosystem, including high flow HotEnds like SuperVolcano and high flow Revo Nozzles (coming soon!)

Less likely to strip filament. In the event of a jam, the filament drive mechanism for Revo Hemera XS will stall instead of stripping filament, making it easier to recover and get 3D printing again.

Easy nozzle swaps with Revo. A variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.

Better safety. Power reduces to the Revo HeaterCore as it gets hotter, thanks to built-in PTC behaviour. This gives you greater protection against hazards caused by thermal runaways.

T-slot flat mounting. Our custom mounting system means a range of accessories can be mounted on this extrusion system, such as bed levelling probes, expansion boards, and more!

Just add a 3D printer. Everything you need to start 3D printing is in the box, including Revo Nozzles and a Revo HeaterCore. Just mount it to your 3D printer and you’re ready to go!

E3D Revo Hemera XS Key features:

– Max temp: 300°C

– Voltage 24V

– Power: 40W

– Filament diameter: 1.75mm

– Nozzle type: RapidChange Revo

– Mounting system: T-slot

– Step angle: 1.8°

– Recommended current: 1.40A Peak (~0.99A RMS)

– Mass: 256.25g

E3D Revo Hemera XS includes: 

– 1 x Hemera XS Assembly

– 1 x Hemera fixings kit

– 1 x 40 x 40 x 10 mm 24V Fan

– 1 x Revo HeaterCore 24V

– 1 x Revo HeaterCore spring

– 1 x Extension cable kit

E3D Revo Hemera XS Fully Loaded Kit:

– 1 x 0.25, 0.40, 0.60 & 0.80 Brass Revo Nozzles

Ready for Revo. Change nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Revo Nozzles are a factory sealed nozzle and heatbreak in one, so they’re easy to fit and can’t leak material when in use. 

New hotness. A Revo HeaterCore heats up in seconds. It’s much safer too – unlike other solutions on the market, a positive temperature coefficient (PTC) means the Revo HeaterCore can not melt at extreme temperatures: power reduces as it gets hotter, so hazards are reduced in the event of a thermal runaway. 

Tight filament path. Hemera is a combined extruder and HotEnd, so it has fewer transitions than most extrusion systems available. A tight filament path gives it excellent performance with hard-to-print materials, like flexibles. Even with the softest flexibles, you can print without the underextrusion or filament binding you would get with a typical setup. 

Resistant to wear. Hemera’s stainless steel hobb teeth are resistant to wear, so with the right combination of components, your Hemera can effortlessly 3D print advanced abrasive and composite materials, like carbon fibre-filled filaments, for serious industrial applications. 

(Disclaimer: abrasion-resistant Revo Nozzle required – ETA 2022) 

Optimised airflow. Hemera has a uniquely designed lightweight aluminium heatsink for highly effective cooling. Air is circulated through the fins and then up and away from the 3D print, preventing any unintentional warping of the printed part. 

No loss of torque. Hemera’s 3.32:1 dual drive gears produce pushing force of up to 120N on your filament from both sides, for accurate, controlled extrusion with no loss of torque. Sharp, individually machined hobb teeth ensure excellent filament grip strength, and round-bottomed profiles help to reduce any build-up of filament debris, for high-quality, consistent extrusion from first to final layer. 

E3D quality. Each Hemera drivetrain includes shielded bearings and high quality igus® bushings for optimal wear resistance. Lubrication is precisely applied to each drivetrain by robots during assembly, and drivetrains are thoroughly analysed using an accelerated wear test to ensure your Hemera will have many years of 3D printing life. 

Mounting options. Hemera’s custom motor end-caps provide convenient T-slots for flat mounting on many popular 3D printers, leaving plenty of room left for other accessories, like bed levelling probes, or extra part cooling fans. 

Flexible to any setup. Hemera plays nice with Bowden and direct drive setups. Just add a Bowden adaptor (sold separately) and your Hemera becomes a powerful Bowden filament drive. 

E3D Revo Hemera Fully Loaded Kit Key features:

– Compatible with 1.75mm filament

– Max temp: 300C

– Direct drive

– Up to 120N pushing force

– Top choice for flexible filaments

– T-slot mounting system

– Step angle: 1.8°

– Rated current: 1.33A

– 3.32:1 gear ratio

E3D Revo Hemera Fully Loaded Kit includes: 

– 1 x Hemera Assembly

– 1 x Hemera fixings kit

– 1 x 40 x 40 x 10 mm 12V or 24V Fan

– 1 x Revo HeaterCore 12V or 24V

– 1 x Revo HeaterCore spring

– 1 x Extension cable kit

E3D Revo Hemera Fully Loaded Kit:

– 1 x 0.25, 0.40, 0.60 & 0.80 Brass Revo Nozzles