Extruder Dual Gear – Techbitshop

Creality Sprite Extruder PCB Breakout Board CRI-2161

Heinz — Sat, 13 May 2023 20:04:38 +0000

Creality Sprite Extruder PCB Breakout Board CRI-2161

Reserve print til Sprite Extruder

Extruder Dual Gear Venstre til dual extruder

Heinz — Wed, 02 Nov 2022 19:15:39 +0000

Extruder Dual Gear Venstre til dual extruder

Materiale: aluminium
Ekstruder Type: Bowden ekstruder
Farve: Rød
Fordel: 1. Ekstruktionsmekanisme med dobbelt gear, høj ekstruderingskraft, der sikrer jævn fodring
3. Bedre hold på filamentet end mk8

Vær opmærksom på, at har du en extruder hvor extruder gearet er presset på, kan akslen være for kort (skal være mere end 20mm)

Passer ikke på extrudere som sidder i venstra side så som CR10S pro

LDO Orbiter V2.0 Dual Drive Direct Extruder

Heinz — Fri, 04 Mar 2022 19:51:44 +0000

LDO Orbiter V2.0 Dual Drive Direct Extruder.

One of the most expected project of 2021, theOrbiter v2.0 High precision direct drive extruder, using custom manufactured by LDO Motors.

This is our finest direct drive extruder system, in which we have integrated all what we learned about extruders in the past years.

Features:

1. Shorter drive gears 11mm vs 15mm.

2. Hardened filament drive gears manufactured by Bondtech.

3. Weight reduced to ~135 grams.

4. Smaller more compact dimensions (11.6% shorter).

5. New motor design offers ~40% increase, in pushing force in real printing conditions and much improved acceleration performance.

6. Flipped drive gears – filament path closer to the extruder center for a more balanced design and perfect fit on delta printers as well.

7. Stainless steel filament exit guide, with 0.2-0.3mm clearance, to drive gears for best TPU printing experience, and extreme wear resistance, when using abrasive filaments..

8. High temperature resistant injected housings, GPA12.

9. Machined PEEK secondary drive gear.

10. Tension mechanism with grab screw design (Captive Grab Screw).

11. Mounting screws in line with filament exit path – improving housing stiffness and easier mounting.

12. Perfectly aligned filament path.

13. New smaller and better PTFE input coupler.

14. Motor position rotated by additional 10 degrees for easier maintenance and assembly.

15. Filament sensor add on, with auto load and unload button add on feature.

16. And many more small changes, to improve mechanical accuracy and design look.

Extruder Dual Gear med push fitting både ind og ud af extruder.

Heinz — Sun, 16 Jan 2022 16:10:43 +0000

Extruder Dual Gear med push fitting

Materiale: aluminium
Egnet til: CR-10, For CR-10S, Ender-3 og V2, Ender-3 Pro, CR 6 SE og Ender 5 med flere
Ekstruder Type: dual Bowden ekstruder
Farve: Rød
Fordel:
1. Ekstruktionsmekanisme med dobbelt gear, høj ekstruderingskraft, der sikrer jævn fodring
2. Bedre hold på filamentet end mk8

Extruder Dual Gear fra CR-10S Pro egnet til Ender-3 og V2/Ender-3 Pro/Ender-5/CR10 serie

Heinz — Sat, 07 Dec 2019 14:38:47 +0000

Extruder Dual Gear fra CR-10S Pro

Ekstruder: CR-10S PRO
Materiale: aluminium
Egnet til: CR-10, For CR-10S, Ender-3 og V2, Ender-3 Pro, CR 6 SE og Ender 5 med flere
Ekstruder Type: Bowden ekstruder
Farve: Rød
Fordel:
1. Ekstruktionsmekanisme med dobbelt gear, høj ekstruderingskraft, der sikrer jævn fodring
2. Driveren til aluminiumslegeringen leveres med CR-10S PRO. Det kan også installeres i Ender-3 og V2, CR-10, For CR-10S, Ender-3, Ender-3 Pro og Ender 5
3. Bedre hold på filamentet end mk8

Vær opmærksom på, at har du en extruder hvor extruder gearet er presset på, kan akslen være for kort (skal være mere end 20mm)

Extruder Dual Gear fra CR-10S Pro