Bondtech Accessories – Techbitshop

Bondtech LGX Lite Front Plate Cubes

Heinz — Mon, 25 Mar 2024 20:09:31 +0000

Bondtech LGX Lite Front Plate Cubes

Spare part for the Bondtech LGX® Lite
Cubes Design
Front housing made of grey Polyamide without dyeing.
Features a wax protective coating and the LGX® Lite BONDTECH sticker.

Bondtech Drivegear kit 5mm 1.75mm

Heinz — Thu, 21 Jul 2022 16:36:34 +0000

Bondtech Drivegear kit 5mm 1.75mm

Bondtech drivgear i hærdet og overfladebeskyttet stål.
Præcisions cnc-bearbejdet.
Super skarpe tænder for maksimalt greb om glødetråden.
Det perfekte valg til et højtydende fodringssystem.
Ekstremt høj slidstyrke til brug med slibende filamenter.

Disse drivudstyrssæt kommer som et sæt bestående af et primært drivgear, et sekundært drivgear, lejer og en aksel.

Gearsæt til filamentstørrelse 1,75 mm, primærgear med indvendig diameter 8 mm, sekundært gear med integrerede nålelejer, M4x3 sætskrue og en 4 x 22 mm aksel.

Det anbefales at bruge et litiumbaseret fedt på geardelen og inde i nålelejerne for lav friktion og for at undgå slid. En lille klat fedt er nok.

Bondtech Drivegear kit 5mm 1.75mm

MR84ZZ leje 4x8x3 Bondtech DDX Direct Drive eXtrude

Heinz — Thu, 21 Jul 2022 13:42:57 +0000

MR84ZZ leje 4x8x3 Bondtech DDX Direct Drive eXtrude

High precision ball bearing that is used in our DDX Direct Drive eXtrude.
Dimensions: 4x8x3

Bondtech HeatLink adaptor (Vælg type)

Heinz — Sat, 22 Jan 2022 22:19:19 +0000

Bondtech HeatLink adaptor

Bondtech® HeatLink JST XHP-2
Bondtech® HeatLink Ferrule
Bondtech® HeatLink JST SMP-02V-BC
Bondtech® HeatLink JST XH-2 With Lock

Bondtech BMG Internals Set for Sherpa Mini

Heinz — Sat, 22 Jan 2022 20:36:09 +0000

Bondtech BMG Internals Set for Sherpa Mini new version

Original Bondtech® OEM set of parts to use on the Sherpa Mini
from the Annex Engineering group.

With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears

Precision cnc-machined.

Super sharp teeth for maximum grip on the filament.

The perfect choice for a high-performance feeding system.

Extremely high wear resistance for use with abrasive filaments.

What is included

1x 1.75/5.0mm Bondtech® Drive Gear Set
- Includes primary gear with inner diameter 5 mm, secondary gear with two needle bearings, M3x2 set-screw and one 3 x 20 mm shaft.
1x Main Shaft Assembly (27.6 – 27.8 mm long)
1x Thumbscrew Assembly
2x 5x8x2.5 Ball Bearing
5x M3 Thread Insert
2x M3x16mm BHCS screw
2x M3x14mm BHCS screw
2x M3x8mm BHCS screw

https://github.com/Annex-Engineering/Sherpa_Mini-Extruder

Bondtech HeatLink 24v 50W Heater

Heinz — Sat, 22 Jan 2022 15:54:50 +0000

Bondtech HeatLink 24v 50W Heater

Plug & Play Heater

1.5m leads with black sleeves and Molex micro-fit 3.0 female connector;
Ø 6mm Stainless Steel cartridge with laser engraved Bondtech logo, SKU, electric specification and date of packaging;
24v 50W heating element;

husk HeatLink som passer til din printer,

Bondtech 700 mm, PC2510 4-pin connector to JST-XH6 6-pin connector. PC2510

Heinz — Wed, 20 Oct 2021 20:55:59 +0000

Bondtech 700 mm, PC2510

PC2510

700 mm, PC2510 4-pin connector to JST-XH6 6-pin connector.

This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that it follows the schematics for your application.

Specified wiring of this cable can be found down below.

Controller side Motor side
PIN 1 —————– PIN 1
PIN 2 —————– PIN 4
PIN 3 —————– PIN 3
PIN 4 —————– PIN 6

MR85ZZ leje 5x8x2.5 Bondtech BMG extruder

Heinz — Wed, 20 Oct 2021 20:42:38 +0000

MR85ZZ leje 5x8x2.5 BMG extruder

High precision ball bearing that is used in our BMG and in our Dual & Single direct extruders for Raise3D.
Dimensions: 5.0×8.0×2.5

MR85ZZ leje er en type miniature-kugleleje, der er populær inden for 3D-printning og andre præcisionsapplikationer. Det er et lukket kugleleje med en indvendig diameter på 5 mm, en udvendig diameter på 8 mm og en bredde på 2,5 mm.

MR85ZZ kuglelejet er kendt for sin glatte og præcise rotation samt dets evne til at håndtere høje rotationshastigheder. Det er lavet af holdbart materiale og er designet til at modstå belastning og slid over længere tidsperioder.

Dette kugleleje bruges ofte i små mekaniske systemer, som f.eks. 3D-printere, robotter, droner og lignende. Det hjælper med at reducere friktionen og sikrer en jævn bevægelse, hvilket er afgørende for nøjagtige og pålidelige bevægelser i disse applikationer.

MR85ZZ-kuglelejet er nemt at installere og vedligeholde. Det tilbyder også god beskyttelse mod støv og snavs på grund af sin lukkede konstruktion. Ved korrekt pleje og smøring kan dette kugleleje have en lang levetid og bidrage til optimal ydeevne i dine mekaniske systemer.

Bondtech SLS made Universal BL Touch Mount for Bondtech DDX for Creality

Heinz — Wed, 20 Oct 2021 20:30:23 +0000

Bondtech SLS made Universal BL Touch Mount

Mount a BL Touch bed levelling sensor onto the DDX.
Part made of PA12 (Nylon) with the SLS 3D printing process.
Better surface finishing and higher working temperature resistance.
Universal slot – allows for height adjustment.

Not compatible with Ender-6.Look for a compatible bed probe mount here

Bondtech SLS made Universal BL Touch Mount Recommended Component

This BL Touch mount is recommended to install the popular bed levelling sensor on our Bondtech DDX Direct Drive eXtruder for Creality. This PA12 version allows for higher working temperatures than its FDM counterpart.

The Universal version has a slot to enable adjusting the Z off-set to the bed and nozzle tip, thus enabling it to be used with all available hotends compatible with the DDX.

If you use a Copperhead or a Mosquito hotend, be aware we have available specific versions for those hotends.

Included in this product

1x 10079-60 SLS Universal BL Touch Mount for DDX

Bondtech Thumbscrew Assembly

Heinz — Wed, 20 Oct 2021 19:57:48 +0000

Bondtech Thumbscrew Assembly

Thumbscrew Assembly

Thumbscrew replacement for Bondtech extruder.