Bundkortet er kompatibelt med Klipper, RepRap og Marlin og understøtter Raspberry Pi og Octoprint.

Octopus Pro:

• Octopus Pro F446 (180 Mhz ARM-Cortex-M4 CPU & 1MB flash memory)

8 kraftfulde stepper drivere

8 kraftige step-drivere giver mere stabil drift.
5V niveau for stepmotordrivere og 60V motorindgangsspænding bidrager til bedre ydeevne og reduktion af pulstab.

168Mhz ARM Cortex-M4 CPU 

BIGTREETECH Octopus Pro bruger en 32-bit ARM Cortex-M4 serie chip med en kernefrekvens på 180 Mhz , hvilket giver nok kraft til at realisere selv de mest krævende applikationer og ideer.

NTC100K Onboard MAX31865 Chip

For NTC100K & PT100/PT1000 high-temperature thermistors.

Compatible Stepper Driver Interfaces: SPI, UART, STEP/DIR

Matching Screens:

• LCD display (LCD12864, LCD2004 etc.)
• TFT touch screens

Fan Connections:

• 6 x controllable PWM fans
• 2 x normal fans
• 3 x adjustable voltages for the fans (5V, 12V and 24V)

Other Interfaces:

• 8 x stepper driver connections
• Raspberry PI Interface
• CAN BUS, SPI and I2C for extensions
• USB-C
• Dual Z-axis
• 4 x heating cartridge connections
• RGB LED
• WiFi interface for ESP8266 based modules
• BL-Touch and other auto-levelling upgrades

Manual

BTT SKR Pico V1.0 is a customized motherboard designed for the VORON V0 printer, which was launched by the 3D printing team of Shenzhen Big Tree Technology Co., Ltd.

Key Features:

• Brand-new Version for Voron V0& V0.1. Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040, Bigtreetech SKR Pico V1.0 upgraded on ID design, which coexists of stylish appearance and excellent performances, ideal choice for Voron players. The fuse kit consists of fuse and holder, which enables easy disassembling and installation. Type-C interface allows for main control communication.
• Perfectly match With Raspberry Pi. With the Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal space. The unique lateral design of SKR Pico‘s seat perfectly matches the space characteristics of the Voron V0 and V0.1 machine that needs to be fixed to the motherboard longitudinally.
• Mute Printing & Premium Capacitors. Featured with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts high-quality Murata capacitors to enhance the product’s quality.
• Upgraded Heat Dissipation. Upgrade the design of the heat sink and increase the heat dissipation area. Increased controllable fan enables to lower the temperature of the whole machine when the it’s working, effectively solving problems related to heat dissipation, and improving on the heat dissipation.

For more detailed information:

https://github.com/bigtreetech/SKR-Pico

BIGTREETECH Octopus V1.1, er et meget kraftfuldt bundkort, med 8 stepper driver porte, så dette bundkort kan styre op til 8 forskellige akser, denne funktion er især velegnet, til flerfarvet print og værktøjsskiftere, til brug af forskellige værktøjer/moduler såsom, forskellige 3D printhoveder, lasergravering, laserskæring osv.

Bundkortet er kompatibelt med Klipper, Raspberry og Marlin open source-software.

BIGTREETECH Octopus V1.1, 180 Mhz ARM-Cortex-M4 CPU

BIGTREETECH Octopus V1.0 bruger en 32-bit chip fra ARM Cortex-M4-serien STM32F446ZET6 med en kernefrekvens på 180 MHz, som tilbyder nok strøm, til at realisere, selv de mest krævende, applikationer og ideer.

Firmware opgradering via SD card

Opdater konfigurationsfirmwaren fra SD-kortet. Denne metode er enkel, praktisk og effektiv.

Compatible stepper driver interfaces: SPI, UART, STEP / DIR

Kombatible skærme:

• LCD display (LCD12864, LCD2004 etc.).
• TFT touch screens.

BIGTREETECH Octopus V1.1 her Blæser forbindelser:

• 6 x kontrollerbare PWM blæsere.
• 2 x normale blæsere.
• 3 x justerbare spændinger til ventilatorerne (5V, 12V and 24V).

BIGTREETECH Octopus V1.1 Andre grænseflader:

• 8 x stepper driver connections
• Raspberry PI Interface
• CAN BUS, SPI and I2C for extensions
• USB-C
• Dual Z-axis
• 4 x heating cartridge connections
• RGB LED
• WiFi interface for ESP8266 based modules
• BL-Touch and other auto-leveling upgrades

Andre funktioner:

• Stallguard for sensorless homing.
• Protected thermistor connections.
• On-board EEPROM.
• High power MOSFET.
• Support of automatic shutdown after printing and resume print.

Bundkortet er specielt skabt til en problemfri opgradering og kan meget nemt bruges i stedet for originalen.

I modsætning til den tidligere version er SKR MINI E3 V3.0 hardwareopgraderet og er ikke længere kun kompatibel med Ender 3 serien, men også med Ender 5 serien, CR-10S/S4/S5 3D-printere

Kompatible skærme:

• BTT TFT touchscreens: 2.4 / 3.5 inches
• LCD12864 (original LCD-skærm fra Creality)

Ventilatorstik

• 3 x kontrollerbare CNC blæsere

Andre interessante grænseflader

• Modul til BLTouch, TFT touchscreen, Neopixel LED-strips
• 5V strømgrænseflade
• RGB interface
• Automatisk nedlukning efter print
• Detektionsmodul for strømsvigt
• Filament sensor
• BLTouch interface
• Dual Z-axis interface
• Micro USB port