Good adhesion of your print to the printbed is a must in 3D printing! In order to keep your object fixed during printing and avoid warping, there is now DimaFix – Pen. DimaFix Pen is a new product based on the Dimafix – Fixative Spray (an aerosol spray adhesive for 3D printers with a heated printbed, which prevents warping of large-scale objects).

Dimafix – Pen  for 3D Printing Adhesive  maintains the same adhesion properties as the Dimafix adhesive aerosol spray that offers a strong bond between the first layer and the build plate when the bed is heated above 60ºC. Below 60ºC Dimafix becomes inactive, so prints can easily be removed from the build plate. DimaFix – Pen provides a strong bond between glass and plastic that is easy to break when needed. Dimafix is completely water soluble, so cleaning the build plate is an easy process. The Dimafix – Pen 3D Printing Adhesive can be used more than 100 times and does not contain any gas.

Different print bed temperature results in different levels of adhesion:

Below 60ºC:     Low adhesion, the objects can be detached from the plate.

60 – 85ºC:         Average adhesion, for simple geometries.

85 – 95ºC:          High adhesion, for complex geometries and lengthy prints.

Above 95ºC:     Very high adhesion, for very complex geometries and very lengthy prints.

• Dimafix is a spray tailored for 3D printers with FFF technology and Heated Bed.

  • It provides great grip between plastic and glass, so warping is not a problem even in large ABS parts.
  • You will be able to print in all kind of thermoplastic materials.
  • The adhesion property will be activated when the Heated Bed’s temperature is higher than 50ºC.
  • While the bed is hot the adhesive effect will be working even in large prints.
  • When the Heated Bed’s temperature goes down (40-50ºC) the adhesion effect disappears and the model will be easily detached.
  • It is soluble so it is easy to clean only with water.
  • It has a long useful life (more than 100 uses).

  The first layers in the printing process will be fixed with a lightly spraying of Dimafix at the hot Heated Bed in the point where the part will be printing. This action avoids unintended effects or warping. Once the printing process is ending and the Heated Bed’s temperature is under 50ºC the model can be removed without any effort from the bed and no tools, that would damage the part, are required.

  Dimafix is distributed as a spray can with an interior ball which helps to prevent blockages at the nozzle. The can capacity is 400ml, this suppose a long useful life of the product because the lightly spraying is only necessary at the area where the piece will be printing.

Dimafix spray 400ml