Nextruder V6 Dyse Adapter: Brug Dine V6 Dyser på Nextruder

Hvis du ønsker at bruge dine eksisterende V6-dyser på din Nextruder, skal du installere dem sammen med denne dyseadapter. Denne adapter skaber den nødvendige kompatibilitet, så du kan udnytte dine foretrukne V6-dyser med din nye generation af printere.

Dette produkt inkluderer:

• Nextruder V6 Dyse Adapter (1 stk.)

Bemærk: V6 dyse er ikke inkluderet.

Installation

For at installere Nextruder V6 Dyse Adapteren, bedes du konsultere vores samlevejledninger.

Passer til

• MK4
• XL
• MK3.9
• MK4S
• MK3.9S
• CORE One

Prusa Nextruder Dyse: Helt igennem metal for forbedret pålidelighed

Til vores nye generation af printere bruger vi specielle dyser med en filamentføring helt i metal. Det betyder, at hele vejen filamentet bevæger sig gennem Nextruder er uden PTFE-rør. Dette forbedrer printerens overordnede pålidelighed og gør dyseskrift langt hurtigere.

Har du dine foretrukne V6-kompatible dyser? Ingen bekymringer – vi tilbyder en simpel Nextruder-til-V6-adapter, så du stadig kan bruge dem.

Installation

For at installere din Nextruder Prusa Dyse, bedes du konsultere vores samlevejledninger.

Passer til

• MK4
• XL
• MK3.9
• MK4S
• MK3.9S
• CORE One

Termistor NTC 100k – 90 mm: Præcis Temperaturmåling

Dette produkt indeholder de nødvendige komponenter til nøjagtig temperaturmåling i din printer.

Dette produkt inkluderer:

• Termistor NTC 100k – 90 mm (1 stk.)
• Stiftskrue M3x4 (1 stk.)

Installation

For at udskifte delen(e), bedes du konsultere vores samlevejledninger. Husk at følge den specifikke vejledning for din printermodel.

Passer til

• MK4
• XL
• MK3.9
• MK4S
• MK3.9S
• CORE One

Termistor NTC 100k – 115 mm: Præcis Temperaturmåling

Dette produkt indeholder de nødvendige dele til præcis temperaturmåling i din printer.

Dette produkt inkluderer:

• Termistor NTC 100k – 115 mm (1 stk.)
• Stiftskrue M3x4 (1 stk.)

Installation

For at udskifte delen/delene bedes du konsultere vores samlevejledninger. Sørg for at følge den vejledning, der er specifik for din printermodel.

Passer til

• MK4
• XL
• MK3.9
• MK4S
• MK3.9S
• CORE One

Varmelegeme 40W – 120mm: Præcis Temperaturkontrol

Dette varmelegeme sikrer effektiv og præcis opvarmning i din 3D-printer.

Dette produkt inkluderer:

• Varmelegeme 40 W – 120 mm (1 stk.)
• Stiftskrue M3x4 (2 stk.)

Specifikationer:

• Spænding: 24V
• Effekt: 40W
• Længde: 120 mm

Installation

For at udskifte delen(e), se venligst vores samlevejledninger. Sørg for at følge vejledningen, der er specifik for din printermodel.

Passer til

• MK4
• XL
• MK3.9
• MK4S
• MK3.9S
• CORE One

Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

All sheets are checked and verified to be within tight specifications. However,
these specifications are both considering the manufacturing method and the sheets function (adhesion and durability used with certain material types), but not the cosmetic aspect of the pattern left on printed parts. We can not guarantee the pattern left on your printed objects will match perfectly from sheet to sheet.

WARNING:

Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our Blog.

Pros

• Scratchproof, hard to damage
• Transfers texture to prints
• More forgiving Live Adjust Z setting
• No need for glue stick for PETG
• Prints automatically detach after sheet cools down
• First layer can be more squished compared to smooth sheets

Cons

• PLA prints with a small contact area may need a brim
• Need to change Live Adjust Z if you also own Smooth PEI sheet
• PLA prints with a huge footprint may warp
• Never clean with acetone

This product includes:

• IR filament sensor 1 (pcs)
• IR filament sensor-Buddy board cable (1 pcs)
• Textile sleeve (Length: 220 mm, Width: 5 mm) (1 pcs)
• PTFE tube (1 pcs)
• MINI FSENSOR BOX (1 pcs)
• MINI FSENSOR COVER (1 pcs)
• MINI FSENSOR LEVER (1 pcs)
• Steel ball (1 pcs)
• Magnet (2 pcs)
• Screws: M3x12 (3 pcs), M2x8 (1 pcs)

Compatibility:

• Original Prusa Mini
• Original Prusa Mini+

This product includes:

• Hotend PTFE tube (1 pcs)

Specifications:

• Length: 42.3 mm (tolerance +/- 0.2 mm)
• Inner diameter: 1.85 mm
• Outer diameter: 4 mm

Compatibility:

• Original Prusa MK3S+
• Original Prusa MK3S+ with MMU2S

Heatbed thermistor set for the Original Prusa MK4

Kompatible printermodeller: MK4

This product includes:

• Heatbed thermistor (1 pcs)
• Kapton tape (1 pcs)
• Aluminum tape (1 pcs)

Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.

Original Prusa i3 MK3/S and MK2.5/S  Prusa 4 and Core heatbeds.

Find more details about the spring steel sheets in our knowledgebase.

WARNING:

Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our Blog.

Pros

• Scratchproof, hard to damage
• Transfers texture to prints
• More forgiving Live Adjust Z setting
• No need for glue stick for PETG
• Prints automatically detach after sheet cools down
• First layer can be more squished compared to smooth sheets

Cons

• PLA prints with a small contact area may need a brim
• Need to change Live Adjust Z if you also own Smooth PEI sheet
• PLA prints with a huge footprint may warp
• Never clean with acetone